|
|
|
 |
 |
|
|
|
|
|
 |
|
|
|
Analysis with partial safety factors acc. to DIN 1054:2005 / SIA 267 (Swisscode) / Eurocode / British Standard: now available with checks and characterstic section forces acc. to DIN 1045:2005!
New recommendations EAU 2004 and EAB 2006 available incl. separate section forces from
dead/live/water loads,
new approach for elastic bedding acc. to EB 102
earth pressure acc. to DIN 4085:2007 incl. spatial earth pressure
Version française: DC-Fouille
|
|
|
Integrated foundation engineering with interface to DC-Pit see program DC-Integra
|
|
|
|
|
|
|
|
|
|
|
DC-Pit for Windows
|
|
|
|
Construction pit analysis
|
|
|
|
Bore pile walls, diaphragm walls, sheet pilings
girder plank walls, MIP (Mixed In Place)
Wall types may be combined
Inclined walls with earth pressure on the incline
Active, increased active earth pressure or at rest
Different redistribution figures
Dead and live loads, block loads
Different layers and slopes
Any water levels in front of and behind the wall
Excavation and dismantling stages
Up to 20 anchor positions and props
Inactive anchors in order to analyze variants
Anchor analysis in the deep sliding plane
Extensive result output
Graphic of system, earth and water pressures,
section forces and displacements
Activation of load cases and excavation conditions
Simple changes with double click
Copy and paste of elements
Export graphic in JPG format (e.g. for Word)
Language selection: English, German or French
|
|
|
|
Option Dimensioning for the dimensioning of all parts: girders, sheet pilings, reinforced concrete, anchors, booms:
Design acc. to DIN 1045, DIN 1045-1, DIN 18 800,
SIA 262, SIA 263, ÖNORM B 4700,
British Standard BS 8110 and 5950,
Indian Standard IS 456 and IS 800
|
|
|
|
Download demo video
AVI, 11 MB / WMV, 6 MB
|
|
|
|
|
|
See also: bearing capacity, settlement, footing, pylon footings, slope stability, geosynthetics, gabions, cantilever wall, soil nailing, foundation pit dimensioning, underpinning, integrated foundation engineering, pile analysis, vibrocompaction, dewatering, infiltration.
Soil exploration: Bore hole log, layer specification, well graphics, dynamic probing, geologic sections, cone penetration, sieve analysis, load plate test, compression test, proctor test, consistency limits, shear strength test, density test, permeability test, pump test, lime content, glow loss, old load survey, GIS.
|
|
